Measuring interdiffusion at an interface between two elastomers with tapping-mode and contact-resonance atomic force microscopy imaging

Despite the common use of tapping-mode atomic force microscopy to image composites or polymer blends, very few studies have focused on the measurement of the interdiffusion at an interface between two polymers in contact. In this study, we show how to assess the interphase between two polymers with two methods. First, stable and robust tapping conditions are established, and the problem of the phase contrast is discussed. Second, a contact-resonance method is presented: the tip in contact with the sample is electrostatically excited at its resonance frequency by a self-controlled oscillator. The gain and frequency images allow us to measure the interdiffusion width. Both methods (using high and weak mechanical solicitation) give the same assessment of the interdiffusion width. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Fast and accurate pricing of discretely monitored barrier options by numerical path integration

Barrier options are financial derivative contracts that are activated or deactivated according to the crossing of specified barriers by an underlying asset price. Exact models for pricing barrier options assume continuous monitoring of the underlying dynamics, usually a stock price. Barrier options in traded markets, however, nearly always assume less frequent observation, e.g. daily or weekly. These situations require approximate solutions to the pricing problem. We present a new approach to pricing such discretely monitored barrier options that may be applied in many realistic situations. In particular, we study daily monitored up-and-out call options of the European type with a single underlying stock. The approach is based on numerical approximation of the transition probability density associated with the stochastic differential equation describing the stock price dynamics, and provides accurate results in less than one second whenever a contract expires in a year or less. The flexibility of the method permits more complex underlying dynamics than the Black and Scholes paradigm, and its relative simplicity renders it quite easy to implement.     

Sintering of an ultra pure α-alumina powder: I. Densification,grain growth and sintering path

Sintering in air of an ultra pure α-alumina powder has been investigated. Isothermal experiments have been conducted on green samples shaped by slip casting. The grain growth and densification kinetics have been established. The “relative density/grain size” trajectory, called “sintering path”, has been drawn. Hypotheses concerning the mechanisms controlling grain growth and densification have been formulated. For the first time, it is shown that grain growth and densification kinetics exhibit two distinct regimes, where an initial point defect formation step plays a key role. When point defects have been generated, the diffusion of the associated Al³⁺ cations controls grain growth and densification.     

Buchbesprechungen

Ohne Zusammenfassung     

Protein adsorption onto poly(ether urethane ureas) containing Methacrol 2138F: a surface-active amphiphilic additive

Surface characterization and protein adsorption studies were carried out on a series of additive dispersed and additive coated poly(ether urethane ureas), PEUUs, to characterize early events in the blood compatibility of these materials. A hypothesis that is based on surface hydrophilicity, surface flexibility, and adsorption media has been developed to understand the modulated adsorption of plasma proteins by PEUU additives. Electron spectroscopy for chemical analysis (ESCA) and contact angle analysis were performed on two PEUU formulation as well as on PEUU formulations modified with Methacrol 2138F (co[diisopropylaminoethyl methacrylate (DIPAM)/decyl methacrylate (DM)][3/1]) or acrylate or methacrylate polymer or copolymer analogs of Methacrol 2138F. Methacrol 2138F is a commercially used amphiphilic copolymethacrylate. ESCA showed that the PEUUs loaded with Methacrol 2138F or with its hydrophilic component, homopoly (DIPAM) (h-(DIPAM)), had a higher percentage of nitrogen at their surfaces than did the base PEUUs. Contact angle analysis also showed that the air side of PEUU formulations loaded with Methacrol 2138F were more hydrophobic than was the air side of base PEUUs when films were cast from dimethylacetamide. However, during contact angle testing, the air side of PEUU films loaded with Methacrol 2138F rapidly became more hydrophilic than did the air side of the base PEUU films. A radioimmunoassay and whole or diluted human plasma were also used to characterize the presence of the proteins fibrinogen, immunoglobulin G, factor VIII/von Willebrand factor, Hageman factor (factor XII), and albumin, on the surface of the same PEUUs as analyzed by ESCA and contact angle. The protein adsorption assay showed that PEUU films loaded or coated with Methacrol 2138F, with a copolyacrylate analog of Methacrol 2138F (co(diisopropylaminoethyl acrylate [DIPAA]/decyl acrylate [DA]) [3/1]), or with the hydrophilic polyacrylate or polymethacrylate component analogs of Methacrol 2138F (h-DIPAM or h-DIPAA) adsorbed significantly lower amounts of the proteins than did either the base PEUU formulations or the homopoly(decyl methacrylate) (h-DM) or homopoly(decyl acrylate) (h-DA) coated or loaded PEUUs.     

Stability, in-Vitro and in-Vivo Release Studies from Metronidazole Ointments

The influence of ointment formulation on the stability, the in-vitro release and the in-vivo absorption through the skin of rabbits was investigated. The choice of the selected ointments has no influence on the drug stability with the exception of an acidified emulsion base. A good correlation between in-vitro release and in-vivo absorption was found revealing that metronidazole was quickly released and effectively absorbed from a polyethylene glycol base.     

Investigation of the stability of tablets prepared from sucrose and citric acid anhydride utilizing response surface methodology

Inversion of sucrose is a stability problem particularly of candies with acidic taste that contain sucrose and small amounts of organic acids such as citric acid, since the free d-fructose produced by hydrolysis is hygroscopic. The following possibilities were investigated for preventing the hydrolysis of sucrose in tablets containing sucrose and citric acid: Adding various amounts of tri-sodium citrate to the formulation to neutralize the citric acid, (Hot) melt coating of citric acid and tri-sodium citrate with a vegetable fat at different coating ratios, variation of the ratio of coated citric acid and tri-sodium citrate in formulations, and compressing the formulations with different compression forces. After tablet processing and storage of tablets, the concentration of d-fructose was determined on the basis of enzymatic reactions. A response surface central composite design was used. The above-mentioned variations were chosen as independent variables and the amount of d-fructose was chosen as response variable. The lowest rates of inversion could be achieved by increasing the content of tri-sodium citrate and the ratio of coating material and decreasing the ratio of coated citric acid and tri-sodium citrate in the tablet formulations. The compression force had no significant effect on the inversion of sucrose.